Trane TR200 - Page 87

4-58 Missing Motor Phase Function
Option: Function:
Displays an alarm in the event of a missing motor phase.
[0] Disabled No alarm is displayed if a missing motor phase occurs.
[2] * Trip 1000 ms
NOTE
This parameter cannot be adjusted while the motor is running.
4-6* Speed Bypass
Define the speed bypass areas for the ramps.
Some systems call for avoiding certain output frequencies or speeds due to resonance problems in the system.
A maximum of four frequency or speed ranges can be avoided.
4-60 Bypass Speed From [RPM]
Array [4]
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
4-61 Bypass Speed From [Hz]
Array [4]
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
4-62 Bypass Speed to [RPM]
Array [4]
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
4-63 Bypass Speed To [Hz]
Array [4]
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
Parameter Description
4-50 TR200 Programming Guide