RADIO Mode︱
Listen to the Radio
1. Plug in the earphones . (Earphones must be plugged-in to listen to the Radio)
2. Press the
button to enter the Main Menu.
3. Use the
and buttons to select “Radio” and press .
4. The current FM Radio frequency will be displayed.
The first time you use the Radio, all the FM channels will be automatically scanned and the first 20
channels with a strong signal will be preset. This feature also works if you activate the “FM Reset”
function in the SETTINGS menu.
Selecting a Radio Station
To manually select a radio station, press
or
(the FM frequency will increase or decrease in 0.1MHz
increments) until you reach the desired station. Alternatively, you can press and hold either or to
auto-scan for the next available station.
To Next Page
Loading...
