TRENDnet TEW-823DRU - Gaming

TRENDnet User’s Guide
TEW-823DRU
35
© Copyright 2014 TRENDnet. All Rights Reserved.
 Schedule: Click New Schedule to select the pre-dened schedule to apply. The lter
will only be acve during the me period dened in the pre-dened schedule.
ÍNote: Before applying scheduling, please ensure your Time sengs are congured
correctly and you have dened a schedule. Refer to “Set the Date and Time” on
page 42 and “Create Schedules” on page 30 to create a schedule.
6 Click Add to save the sengs.
ÍNote: In the Rule List secon, you can edit a rule by clicking in the Edit column next
to the rule you would like to edit. To delete the rule, click in the Delete column next
to the rule you would like to delete.
Gaming
Advanced > Firewall > Gaming
Gaming allows you to dene mulple ports (used or required by a specic applicaon or
game) and forward them to a single IP address (a computer or device) on your network.
Using this feature is more secure compared to using DMZ (refer to “DMZ” on page 33)
in which DMZ forwards all ports instead of only specic ports used by an applicaon.
Since most ISPs constantly change your home IP address, to be able to access the Virtual
Server port(s) from the Internet it is recommended to setup Dynamic DNS service (refer to
“Idenfy Your Network on the Internet” on page 29).
1 Log into your router management page (refer to “Log in to Management Page” on page 8).
2 Click on Advanced > Firewall > Gaming.
3 In Add Gaming Rule secon, modify the following values:
 Rule Enable: Check the opon to enable the gaming rule.
 Rule Name: Enter a name for the gaming rule.
 IP Address: Enter the IP address of the device to forward the ports. For example,
192.168.10.101.
 TCP Ports to Open: Enter the TCP port you would like to set.
 UDP Ports to Open: Enter the UDP port you would like to set.
ÍNote: Please refer to the device documentaon to determine which ports and
protocols are required. You should assign a stac IP address to the device or use
DHCP reservaon to ensure the IP address of the device does not change.
 Inbound Filter: Select the dened IP address range to allow access.
 Schedule: Click New Schedule to select the pre-dened schedule to apply. The lter
will only be acve during the me period dened in the pre-dened schedule.
ÍNote: Before applying scheduling, please ensure your Time sengs are congured
correctly and you have dened a schedule. Refer to “Set the Date and Time” on
page 42 and “Create Schedules” on page 30 to create a schedule.