TRENDnet TEW-823DRU - Ipv6 Status; View Events Log

TRENDnet User’s Guide
TEW-823DRU
47
© Copyright 2014 TRENDnet. All Rights Reserved.
IPv6 Status
Advanced > Administrator > IPv6 Status
You can view the current IPv6 status on your router.
1 Log into your router management page (refer to “Log in to Management Page” on page 8).
2 Click on Advanced > Administrator > IPv6 Status.
View Events Log
Advanced > Administrator > SystemLog
Your router log can be used to obtain acvity informaon on the funconality of your
router or for troubleshoong purposes.
1 Log into your router management page (refer to “Log in to Management Page” on page 8).
2 Click on Advanced > Administrator > System Log.
3 In System Log secon, check the Enable System Log opon to enable logging. The logging
will display in the log window.
4 Enter the system log server IP address to Syslog Server IP Address eld.
5 Do any of the following:
 Click Apply buon to save the changes.
 Click Refresh buon to refresh the log window to ensure the most recent logging
informaon is displayed.
 Click Clear buon to clear and delete all of the current logging informaon.
 Log Window: