TRENDnet TEW-831DR - Product Hardware Features: Ports and Buttons; Rear Panel Ports and Buttons; Reset and WPS Button Functionality

© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-831DR
3
Product Hardware Features
Rear View
No
Item
Description
1
Power Port
Connect the included power adapter from your router
power port and to an available power outlet.
2
10/100 LAN Ports 1-3
Connect Ethernet cables (also called network cables)
from your router LAN ports to your wired network
devices.
3
Gigabit WAN/Internet
Port
Connect an Ethernet cable from your router Internet
port to your modem.
4
Reset/WPS Button (Wi-
Fi Protected Setup)
Push and hold this button for 3 seconds and release to
activate WPS. The Power LED on front panel will blink
when WPS is activated.
Push and hold for 5 seconds or longer to reset to
factory defaults. All LEDs will flash.