EasyManuals Logo

TRENDnet TEW-831DR User Manual

TRENDnet TEW-831DR
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-831DR
69
Auto Reboot
Advanced > Setup > Auto Reboot
The scheduled automatic reboot feature allows you to set a daily or weekly schedule for
the router to initiate an automatic reboot in an attempt to resolve any connectivity
issues or intermittent problems that may occur with your device. Before using the
scheduled automatic reboot feature, please ensure your Time settings are configured
correctly. See page 41 to configure Time Settings.
Rule Name: Enter a name for the schedule you would like to apply.
Day(s)/Select Day(s): Check Select Day(s) to select the days in the Select Day(s)
section or select All Week to set the schedule for all days.
All Day 24 Hours Check the option to set the schedule to 24 hours or define
the schedule under Start Time and End Time.
Start Time: Select the start time you would like the schedule to follow.
Note: The schedule defined will define the time/day the feature will be activated.
Commit your changes to the router by clicking on Apply/Discard Changes in the left-
hand menu, and click Apply & Reboot.
Wireless Client List
Advanced > Administrator > Client Status
You can view the list of active wireless devices currently connected to your router.
1. Log into your router management page (see “Access your router management page
on page 10).
2. Click on Advanced and click on Administrator, then click on Client Status.
Connected Devices: Lists all of the currently connected devices via wired physical
connection through the four Gigabit LAN ports.
2.4GHz/5GHz Wireless Connected Devices: Lists all of the currently connected wireless
devices on either 2.4GHz or 5GHz band/radio.
IP Address: The current IP address of the client device.
MAC Address: The MAC address of the client device.
Hostname: The device host name of the client device
SSID: The SSID the client device is currently connected.
Mode: Displays the 802.11 mode associated with the client.
Signal Level: Displays the estimated signal strength (RSSI) of the client device to
the router.
Link Rate: Displays the estimated link rate of the client device connection to the
router.
.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEW-831DR and is the answer not in the manual?

TRENDnet TEW-831DR Specifications

General IconGeneral
Product colorBlack
Cables includedLAN (RJ-45)
Quick installation guideYes
CertificationFCC, IC
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 90 %
Output current1 A
Output voltage12 V
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
DSL WANNo
Modulation16-QAM, 64-QAM, 256-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1200 Mbit/s
VPN supportFTP/TFTP/SIP/RTSP/IRC/H.323
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Receiver sensitivity802.11a: -75 dBm @ 54Mbps 802.11b: -90 dBm @ 11Mbps 802.11g: -72 dBm @ 54Mbps 802.11n (2.4GHz): -72 dBm @ 300Mbps 802.11n (5GHz): -72 dBm @ 867Mbps 802.11ac: -61 dBm @ 867Mbps
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Antennas quantity4
Antenna gain level (max)5 dBi
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA2
Number of products included1 pc(s)
Ethernet LAN (RJ-45) ports3
Weight and Dimensions IconWeight and Dimensions
Depth239 mm
Width155 mm
Height30 mm
Weight228 g

Related product manuals