Name: TRENDnet TEW1750ACV2
Brand: TRENDnet
Rating: 4 (1 reviews)

To Next Page

To Previous Page

TRENDnet User’s Guide

TEW-815DAP

Access Point Mode with Wireless Bridge (WDS)

Wireless bridging using WDS (Wireless Distribution System) allows the device to create a wireless bridge with other WDS supported wireless routers and access points configured in WDS

mode to bridge groups of network devices together wirelessly. Network enabled devices can be plugged into the Ethernet LAN port. WDS is subset option of Access Point mode.

There are 2 types of WDS modes,

• WDS+AP:- Allows the device to establish wireless bridging and function as access point simultaneously, allowing wireless client devices such as computers, game consoles, mobile

phones, etc. to connect to the access point in order to access network resources from multiple groups of network devices as well as the Internet. The diagrams below illustrate

examples of WDS with Access Point.

• WDS (pure WDS): Strictly for establishing wireless bridging only and will not function in access point simultaneously, allowing wireless client devices such as computers, game

consoles, mobile phones, etc. to connect in order to access network resources from multiple groups of network devices as well as the Internet. Please refer to the section

Wireless

Bridge (WDS) Mode page 18 for details on this mode.

Note: You can create up to four WDS bridge connections on each wireless band (2.4GHz and 5GHz). WDS (Wireless Distribution System) is not currently standardized and may not connect

to different model wireless routers or access points, therefore, when using WDS, it is recommended to use the same model and version for wireless bridging.