7 Getting Connected
86 Juno Series User Guide
Pairing with a Bluetooth-enabled device
Pairing the handheld with another Bluetooth-enabled device creates a permanent
security bond between the devices, which helps to exchange information securely
between the devices. The paired relationship is established when two devices create
and exchange a link key. Once the relationship is established, the handheld and the
other Bluetooth device only need to have their Bluetooth radios turned on to exchange
information; they do not need to be visible to other devices.
To pair with a Bluetooth device:
1. Make sure that the handheld and the Bluetooth device you want to pair with are
within five meters of each other, and that the Bluetooth radio in each device is
turned on.
2. On the Juno series handheld, tap / Settings / Connections / Bluetooth.
3. In the Devices tab, tap Add new device. The
handheld searches for other Bluetooth devices
and displays them in the list.
If the device you are trying to connect is not
displayed in the list, ensure that the device is on
and within range and then tap
Refresh to search
for devices again.
4. Tap the name of the device you want to pair with
and then tap
Next on the right softkey.
5. In the Passcode field, enter a passcode of between
1 and 16 characters. If you are connecting to:
– a device with a keypad, enter a passcode of
your choice.
– a device without a keypad, but you know that the device has a
pre-programmed passcode that will be exchanged, enter that passcode on
the Juno series handheld.
Note – Trimble recommends that you enter only numbers, as some devices do not support
passcodes that include letters.
6. Tap
Next on the right softkey.
7. When prompted, enter the same passcode on the other device.
Note – For more information on the types of devices that the Juno series handheld can
connect to, and the supported Bluetooth services, see Connecting to a Bluetooth device as a
client, page 99.
8. Tap
OK in the top right corner of the screen to close the Bluetooth application.
9. Tap in the top right corner to close the Settings screen.
To Next Page
Loading...