Triton Safeguard User Manual

10
Adjusting the temperature
control can alter the flow of
water through the unit.
After obtaining your
preferred showering
temperature the number
setting can be
remembered and left as the
preferred setting.
To decrease the
shower temperature
Turn the temperature
control anti-clockwise; this
will increase the flow of
water through the shower
and is indicated by lower
numbers.
To increase the
shower temperature
Turn the temperature
control clockwise; this
will decrease the flow of
water through the shower
and is indicated by higher
numbers.
Note: In normal use,
it is in order to leave
the water supply
permanently on to
the shower unit, but
as with most electrical
appliances, the unit
must be switched off
at the isolating switch
when not in use.

Triton Safeguard Specifications

General

Type	Electric Shower
Material	Plastic
Color	White
Installation	Wall Mounted
Cable Entry Points	Bottom
Dimensions	200 x 200 x 90 mm