Triumph Speed Triple R User Manual

38
General Information
The tire pressure monitoring system (TPMS)
is an accessory installed item and must be
installed by your authorized Triumph dealer.
The TPMS display on the instrument pack
will only be activated when the system has
been installed.
An adhesive label will be installed to the
wheel rim to indicate the position of the tire
pressure sensor which is near the valve.
Tire Pressure Sensor
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
• This device may not cause harmful
interference;
• This device must accept any
interference received, including
interference that may cause
undesired operation.
Changes or modifications to the device could
void the user's authority to operate the
equipment.
Tyre Pressure Sensor Serial Number
An ID number for each tyre pressure sensor
is printed on a label which is on the sensor.
This number may be required by the dealer
for service or diagnostics.
If the TPMS has been fitted at the factory,
labels identifying the front and rear TPMS
sensor ID numbers will be affixed to the
spaces below.
If the TPMS is being fitted to the motorcycle
as an accessory, ensure that the dealer
records the front and rear TPMS sensor ID
numbers in the spaces provided below.
Front Sensor
Rear Sensor

Triumph Speed Triple R Specifications

General

Engine Capacity	1050 cc
Transmission	6-speed
Seat Height	825 mm
Fuel System	Multipoint sequential electronic fuel injection
Engine Type	Liquid-cooled, 12-valve, inline 3-cylinder
Power	148 hp (110 kW) @ 10, 500 rpm
Torque	117 Nm at 7, 150 rpm
Front Suspension	Öhlins 43mm NIX30 upside down forks with adjustable preload, rebound and compression damping
Rear Suspension	Öhlins TTX36 monoshock, fully adjustable
Front Brakes	Twin 320mm floating discs, Brembo 4-piston radial calipers
Fuel Tank Capacity	15.5 litres