22
General Information
Odometer/Trip Meter
1. Odometer/Trip meter display
2. Trip meter 1 display
3. Trip meter 2 display
Trip Meter
Either trip meter shows the distance that the
motorcycle has travelled, journey time,
average fuel consumption, instantaneous fuel
consumption and average speed, all since the
trip meter on display was last reset to zero.
To access the trip meter information, turn the
ignition to the ON position. Press and release
the set button on the left hand switch cube
until the desired trip meter is visible in the
display screen.
Press and release scroll button on the left
hand switch cube until the desired display is
visible. The display will scroll through in the
following order when pressing up on the
scroll button (it will scroll through in the
reverse order if down on the button is
pressed):
•Odometer;
•Cruise control;
•Average speed;
• Instantaneous fuel consumption;
• Average fuel consumption;
•Journey time;
• Range to empty;
•Journey distance.
Each display provides the following
information:
Odometer
Shows the total distance that the motorcycle
has travelled.
To Next Page
Loading...
