WHEN BRAKING, OBSERVE THE
FOLLOWING:
Close the throttle completely, leaving the
clutch engaged to allow the engine to help
slow down the motorcycle.
Change down one gear at a time such that
the transmission is in first gear when the
motorcycle comes to a complete stop.
When stopping, always apply both brakes
at the same time. Normally the front brake
should be applied a little more than the
rear.
Change down or fully disengage the clutch
as necessary to keep the engine from
stalling.
If the ABS is not functioning or has been
disabled (see page 32), never lock the
brakes, as this may cause loss of control of
the motorcycle and an accident.
To Next Page
Loading...
