63
General Information
Rotate the handlebar so that the etched
+ marking on the handlebar aligns with the
front left hand split line of the clamp riser.
1. Upper clamp, left hand
2. Clamp split line, front
3. Handlebar + mark
Tighten the 10 mm bolts to 35 Nm.
Refit the 8 mm bolts to the front positions
and tighten to 20 Nm.
Windscreen
Note:
• The windscreen fitted to this
motorcycle can be adjusted without
the use of tools.
To Adjust the Windscreen
1. Adjuster knob, right hand side
shown
2. Adjustment block
3. Adjustment plate
Never attempt to clean or adjust the
windscreen while riding the motorcycle.
Removal of the rider's hands from the
handlebars while riding the motorcycle will
diminish the ability of the rider to maintain
the control of the motorcycle. Attempting
to clean or adjust the windscreen while
riding the motorcycle may result in loss of
motorcycle control and an accident.
1
2
3
chem
To Next Page
Loading...
