51
General Information
Activating Cruise Control
Note:
• The cruise control indicator light will
not illuminate until cruise control has
been activated by pressing SET/- on
the adjust button.
To turn on the cruise control, press in the
on/off button.
1. Cruise control ON/OFF button
2. Cruise control adjust button, SET/-
3. Cruise control adjust button, RES/+
To activate cruise control, the following
conditions have to be met:
• The motorcycle is travelling at a speed
between 30 to 100 mph (48 to
16 0 k m / h ) ;
• The motorcycle is in 4th gear or higher;
• The SET/- on the adjust button is
pressed.
The cruise control lamp will illuminate
indicating that cruise control is active and set.
1. Cruise control lamp
To Next Page
