27
General Information
Set Up Menu
To access the set up menu; with the
motorcycle stationary and in neutral, press
and release the set button on the left hand
switch cube until 'SEtUP' is visible in the
display screen.
Press and release the scroll button until the
desired display is visible. The display will scroll
through in the following order when pressing
up on the scroll button (it will scroll through
in the reverse order if down on the button is
pressed):
•Service;
• Auto - self cancelling indicators;
• Units - change units (Imperial, US or
Metric;
• t-set - clock adjustment;
• ttc - Triumph traction control (if fitted);
•ABS.
Each display provides the following
information:
Service
Shows the total distance that the motorcycle
has remaining before a service is required
(see page 33).
Auto - Self Cancelling Indicators
This Triumph model has a self cancelling
indicator function that can be disabled or
enabled.
To disable or enable the self cancelling
indicators; with the motorcycle stationary and
in neutral, press and release the set button on
the left hand switch cube until 'SEtUP' is
visible in the display screen.
Press and release the scroll button until 'Auto'
or 'MAnUAL' is visible in the display screen.
Press and release the set button and Auto or
MAnUAL will flash on and off.
Press and release the scroll button to select
Auto or MAnUAL then press the set button.
• Auto - Indicator self cancelling is on (see
page 47).
• MAnUAL - auto self cancelling is off. The
indicators will need to be manually
turned off (see page 47).
1. A u t o s e l e c t e d
To exit the auto menu, press and release the
home button and the odometer in the trip 1
menu will be visible in the display screen.
To Next Page
Loading...
