TrojanLabel Trojan 2 - Replacing Blades

TrojanTwo User Guide v3.8
Page | 89
17.3 Replacing Blades
The blades for the slitter are consumables and recommended to be replaced when sharpness decrease is
detected.
CAUTION: Never try to replace the slitter blades during operation!
a) Press Emergency Stop button on top of the TrojanTwo press to power off slitter device
b) Move the slitter blades to the right side:
Slitter blades in their sockets x3
Screw fixing the blade
1
.
2
.
3
.
Emergency Stop button