TSC ME240 Service Manual

42
42
2. Please be noted that print head right pressure find turn should be done by
try-and-error. Rotate the Z-axis mechanism adjustment knob for a few circles by
wrench and print again to check if the ribbon wrinkle remains. If the wrinkle still
remains, please turn the Z-axis mechanism adjustment knob clockwise about 1/4
circle each time for adjustment.

TSC ME240 Specifications

General

Resolution	203 dpi / 300 dpi
Operating Temperature	5°C to 40°C (41°F to 104°F)
Print Method	Thermal Transfer & Direct Thermal
Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Humidity	20% to 85% RH (non-condensing)