TSC TE310 Series Service Manual

18
TE200/TE210/TE300/TE310 Series
Bar Code Printer Service Manual
4. Remove the three screws on lower
print engine right side cover as
indicated and open it.
Cable of gap sensor emitter
(black with red)
5. Remove/replace the gap sensor
emitter.
6. Reassemble the parts in the
reverse procedure.
Gap sensor (transmitter)
Cable of gap sensor (transmitter)
Screws

TSC TE310 Series Specifications

General

Resolution	203 dpi / 300 dpi
Print Method	Thermal transfer / Direct thermal
Interface	Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Humidity	20% to 85% (non-condensing)