TSC TE310 Series Service Manual

25
TE200/TE210/TE300/TE310 Series
Bar Code Printer Service Manual
6. Connect the cable and ground
line to the socket on main board
as indicated.
7. Push down the cutter module
and fix on the lower front panel
location hole.
8. Complete the installation of
cutter module.
9. Reassemble the parts in the
reverse procedures.

TSC TE310 Series Specifications

General

Resolution	203 dpi / 300 dpi
Print Method	Thermal transfer / Direct thermal
Interface	Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Humidity	20% to 85% (non-condensing)