TSC TE310 Series Service Manual

44
TE200/TE210/TE300/TE310 Series
Bar Code Printer Service Manual
Exterior
Wipe it with water-dampened
cloth
As needed
Interior
Brush or vacuum
As needed
Note:
 Do not touch printer head by hand. If you touch it careless, please use ethanol to
clean it.
 Please use 100% Ethenol. DO NOT use medical alcohol, which may damage the
printer head.
 Regularly clean the print head and supply sensors once change a new ribbon to
keep printer performance and extend printer life.
 The maximum printing ratio per dot line is 15% for this printer. To print the full web
black line, the maximum black line height is limited to 40 dots, which is 5mm for 203
DPI resolution printer and 3.3mm for 300 DPI resolution printer.

TSC TE310 Series Specifications

General

Resolution	203 dpi / 300 dpi
Print Method	Thermal transfer / Direct thermal
Interface	Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Humidity	20% to 85% (non-condensing)