TSC TTP 246M - Replacing Ribbon Rewind Spindle; TTP-246 M;344 M Bar Code Printer Service Manua L

33
33
TTP-246M/344M Bar Code Printer
Service Manual
4.5 Replacing Ribbon Rewind Spindle
1. Refer to section 4.1 to remove the left side cover.
2. Refer to section 4.4 to remove the belt, Pulley and gear.
3. Remove the 3 screws. Then, Remove Ribbon Rewind Spindle.
Gear
Belt
Pulley
Screws
Ribbon Rewind
Spindle