TSC TTP 246M - Page 71

68
68
TTP-246M/344M Bar Code Printer
Service Manual
2. Labels may be stuck in
side print mechanism.
gap/black mark sensor.
2. Remove the stuck label.
Carriage open
The printer carriage is open.
Please close the print carriage.
Memory full
( FLASH / DRAM )
The space of FLASH/DRAM
is full.
Delete unused files in the
FLASH/DRAM.
No printout printing
through serial port
1. The serial port setting is
not consistent between
host and printer.
2. The serial port cable pin
configuration is not pin to
pin assignment.
1. Please reset the serial port
setting.
2. Please replace the cable
with pin to pin assignment.