Tyco F4000 User Manual

F4000 LCD Operator's Manual Document No: LT0117
Operating Instructions - Point Functions
Page 8-10 19 April 2002 Issue 2.38
8.2 ANALOGUE DETECTOR HISTORY, TRACKING, DEVICE RESET
8.2.1 FUNCTION
Allows an operator to reset the analogue history or tracked value for a detector. These
values are stored and maintained at the AAR or MPR.
A reset can also be applied to the physical device itself.
8.2.2 OPERATING SEQUENCE
To reset an analogue detector's History or Tracked Value, or to apply a reset to the detector
itself, press:
where rrr is the responder number
ppp is the analogue point number
The LCD prompts for the type of reset required, press:
to reset the point, i.e. turn LED off, and force detector to normal.
to reset the detector history high and low values.
to reset the detector tracking, history high and low values.

Tyco F4000 Specifications

General

Brand	Tyco
Model	F4000
Category	Fire Alarms
Language	English