Tyco F4000 User Manual

Document No: LT0117 F4000 LCD Operator's Manual
Operating Instructions - Brigade Functions
Issue 2.38 19 April 2002 Page 5-11
5.9 RECALLING THE ALARM LIST
5.9.1 FUNCTION
It is possible for there to be un-isolated alarms present in the system, but the display is NOT
in FFCIF mode, for example, the operator has exited the FFCIF to perform recall functions.
The list of alarms can be recalled, and thus put the display into FFCIF mode.
5.9.2 OPERATING SEQUENCE
Press the "CLEAR" key until any base or information recall display is shown.
Then press:
NOTE: If no un-isolated alarms exist, the LCD will briefly display "No more events in
alarm list", and then revert to the base display.

Tyco F4000 Specifications

General

Brand	Tyco
Model	F4000
Category	Fire Alarms
Language	English