Tyco F4000 User Manual

F4000 LCD Operator's Manual Document No: LT0117
Operating Instructions - System Functions
Page 6-10 19 April 2002 Issue 2.38
6.6 RECALL SYSTEM FAULTS
6.6.1 FUNCTION
Allows an operator to view on the LCD the current causes of a "SYSTEM FAULT" indication.
These include problems with the FIP, any Responder or RZDU that could be connected to
the FIP, or another panel on a networked system.
6.6.2 OPERATING SEQUENCE
From any information display or base display, press:
The display will pause briefly while the FIP searches for the first system fault. If none is
found, a brief message is displayed saying so, and the LCD reverts to the base display.
If a system fault exists, the LCD will display it. To view the next fault, press:
To view the previous fault, press:

Tyco F4000 Specifications

General

Brand	Tyco
Model	F4000
Category	Fire Alarms
Language	English