Performance such as audio clarity, echo, and loudness to a
large degree rely on the phone and network, and not the
Uconnect Phone.
Echo at the far end can sometimes be reduced by lowering
the in-vehicle audio volume.
In a convertible vehicle, system performance may be
compromised with the convertible top down.
Voice Text Reply
Once your Uconnect system is paired with a compatible
mobile device, the system can announce a new incoming
text message, and read it to you over the vehicle audio
system. You can reply to the message using Voice Recog-
nition, by selecting, or saying one of the 18 pre-defined
messages.
Here’s how: Push the “Uconnect Phone” button
and
wait for the beep, then say “reply.” Uconnect will give
the following prompt: “Please say the message you
would like to send.” Wait for the beep and say one of the
pre-defined messages. (If you are not sure, you can say
“help”). Uconnect will then read the pre-defined mes-
sages allowed. As soon as you hear the message you
would like to send, you can interrupt the list of prompts
by pushing the “Uconnect Phone” button and saying
the phrase. Uconnect will confirm the message by
reading it back to you. Then push the “Uconnect Phone”
button and say “Send.”
“Yes.” “I’m on my
way.”
“Are you there yet?”
“No.” “I’ll be late.” “See you later.”
“Call me.” “Thanks.” “I’m lost.”
“Okay.” “Start without
me.”
“I need directions.”
“I’ll call you
later.”
“Where are
you?”
“See you in <num-
ber> minutes.”
“I can’t talk
right now.”
“Stuck in traf-
fic.”
“I will be <number>
minutes late.”
Voice Texting Reply and Voice Texting features require a
compatible mobile device enabled with Bluetooth Message
Access Profile (MAP). Some smartphones do not currently
support Bluetooth MAP. Visit
UconnectPhone.com
for
system and device compatibility.
110 UCONNECT 8.4/8.4 NAV
To Next Page
