Remote Horn And Lights
Can’t Find Your Vehicle In The Parking Lot? Sound The
Horn And Flash The Lights On Your Vehicle To Locate It
Description
It is easy to locate a vehicle in a dark, crowded or noisy
parking area by activating the horn and lights. It may also
help if you need to draw attention to your vehicle for any
reason. You can send a request to your vehicle in one of
three ways:
• Using the Uconnect Access App from a compatible
device.
• From the Mopar Owner Connect website
(
moparownerconnect.com
).
• Contacting Uconnect Care.
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to turn on the horn and lights.
How It Works
1. Download the Uconnect Access App to a compatible
device and login using your username and password.
2. To turn on the horn and lights, press the “trumpet icon.”
To turn-off the horn and lights, press the “trumpet icon”
again.
3. A pop-up screen will appear asking for your Uconnect
Security PIN (this is the same 4- digit code established
when your registered your Uconnect Access system).
Enter the Uconnect Security PIN on the keypad and
press “OK.”
4. The Uconnect Access App will confirm if your com-
mand was sent (or not). Press “OK” to close the pop-up
screen.
5. It will take a little while for the command to go through
to your vehicle. The time it takes depends on a number
of technical conditions.
6. A message will appear on the screen to let you know if
the command was received by your vehicle.
50 ALL ABOUT UCONNECT ACCESS
To Next Page
Loading...
