NOTE: You must set up your Uconnect Payment Account
on the Mopar Owner Connect website and establish a
Uconnect Payment PIN to purchase 3G Wi-Fi Hotspot.
2. After purchasing 3G Wi-Fi Hotspot, it will be enabled/
turned on in your vehicle. The 3G Wi-Fi Hotspot App
can be found on your in-vehicle touchscreen by select-
ing Apps
> 3G Wi-Fi Hotspot.
3. 3G Wi-Fi Hotspot should be turned on after purchasing
a subscription. To disable 3G Wi-Fi Hotspot, simply
press to uncheck the box to the right of the App (this
feature is available while the vehicle is in motion).
Optional: Give your hot spot a unique name by pressing
Hotspot Name (key pad is not available while vehicle is
in motion).
4. From your in-vehicle touchscreen, select the appropriate
in-vehicle network and the desired security level setting.
Each security level has different pass phrase constraints.
Change the security level setting by selecting the check-
box for any of the following security settings.
• WPA2/WPA — “WiFi Protected Access” – This is the
default security and can be changed by pressing 3G
Wi-Fi Hotspot > View/Edit Pass phrase.
• WEP — “Wired Equivalent Privacy” – Pass phrase
must be 13 characters long.
3
ALL ABOUT UCONNECT ACCESS 37
To Next Page
Loading...
