4. Curve Tracer Mode
To enter the Tracer mode, click the “CURVE TRACER” icon in the “Main Menu”. The general view of the
Tracer mode is as in Figure 5.
Curve Tracer icon
At the top of the screen; test voltage, test frequency, limit resistance and scanning period (if scanning mode
is active). In addition to these, frame refresh rate and battery status information are also included. On the
left side of the screen is the impedance curve area. On the right side of the screen, there is a menu area
consisting of buttons (Figure 5).
Figure 5. Curve tracer menu overview
To Next Page
Loading...
