109
(1) When multiple robotic arms need to share a set of configuration
parameters, click the 【Export】button to export the configuration file of
a robotic arm that has been set. Then click the 【 Import 】 button to
import the configuration file to other robotic arms.
(2) When the control box fails and needs to be repaired, you can export
and save the configuration file of the robotic arm to prevent the original
data from being lost or changed during the repair process.
(3) The parameters of the robotic arm will change after the factory reset.
Please export the configuration file of the robotic arm before the factory
reset.
Parameters
If you want to modify the joint jerk and TCP jerk of the robotic arm, you
can modify time here.
To Next Page
Loading...
