ULEAD DVD MOVIEFACTORY USER GUIDE 19
• Full DV Tape captures the whole DV tape from tape start to
end.
4. To adjust the capture options, click Show/Hide Options.
• Format allows you to select the file format of the captured
video.
• Capture folder shows the path of the folder where captured
videos are saved. Click Browse to select a different folder.
• Advanced Settings lists additional capture settings.
5. Click Play in the Navigation Panel.
6. When you get to the part of the video you want to record, click
Capture Video. Click Stop Capture or press [Esc] to stop
capturing. The captured video will be added to the Captured
videos list.
7. Repeat steps 6 and 7 to add more clips.
Capturing analog video
DVD MovieFactory allows you to capture videos not only from
digital sources, but also from analog sources. Before capturing
analog videos, set the appropriate options in the Video and Audio
Capture Property Settings dialog box in the Advanced
Settings.
Capture Options dialog box
This is where you can set DVD MovieFactory to capture audio,
detect scenes, and preview the video while capturing. This is also
where you specify the capture frame rate.
• Capture audio Select to capture the audio when capturing from
an analog device.
• Split video by Scene detection Select to capture the different
sequences of footage recorded in a DV tape into multiple files or
clips based on recording dates and times.
Note: Make sure that the audio cable is connected to the line-in jack.
To Next Page
Loading...