8 ULEAD DVD MOVIEFACTORY USER GUIDE
Hardware checkup and
configuration
To ensure that DVD MovieFactory works properly, use the following
information to configure your hardware and DVD MovieFactory.
Hardware checkup before using DVD
MovieFactory
To make sure your video production runs smoothly and trouble-
free, click Control Panel: System - Hardware - Device
Manager and check if your devices are working properly in
accordance with your Operating System (O/S).
In general, as long as the image/imaging device can be seen and
working properly in the Device Manager (this applies to all
Windows versions), DVD MovieFactory and other Ulead products
will be able to detect it and work with it.
IEEE-1394 interface card
The following Windows operating systems support the IEEE-1394
interface card. Always remember to turn on your DV camcorder or
VCR connected to the IEEE-1394 interface card so that the
camcorder can be detected as an image/imaging device or sound,
video and game controller.
Windows 98 Second Edition/ Windows 2000
Check that the following devices are working properly:
• 1394 Bus Controller
• Image Device: Microsoft DV Camera and VCR (For Microsoft DV
driver only.)
• Sound, video and game controllers: 1394 camcorder (For Texas
Instruments DV driver only.)
To Next Page
Loading...