ULEAD USBAV-701 - Split by Scene; Capturing Still Images

24 ULEAD DVD MOVIEFACTORY USER GUIDE
Split by Scene
Usually a single DV tape contains several footage that were shot at
different times. DVD MovieFactory saves you the hassle of
capturing the segments one by one, using the Split by Scene
feature.
To use Split by Scene:
1. Click Advanced Settings and select Capture Options.
2. Select Split video by scene detection and then click OK.
3. Follow the procedure for capturing DV.
Capturing still images
In addition to video, DVD MovieFactory allows you to capture still
images in BMP or JPEG. The dimensions of the captured image will
depend on the frame size of the source video.
To choose your image format:
1. Return to the Add/Edit Media page and press [F6] to open the
Preferences dialog box.
2. Click Capture tab and select the appropriate format in the
Capture image format.
3. Specify the image quality (applicable only for JPEG format).
4. Click OK.
To capture still images:
1. Follow the steps in preparing to capture a video. See “Capturing
video”.
2. Scan your video to search for the part to capture.
3. When you get to the part of the video frame you want to
capture, click Capture Image.
Note: This option is applicable only when AVI is selected as the
capture file format for DV video.