Customer Service: 888-269-7477 GETTING STARTED 15
Step 5: Network Connection
For Wired Connections:
1. Plug the Ethernet cable that came with your phone into the jack on
the back labeled “Ethernet”.
2. Plug the other end of the Ethernet cable into the jack you use to
access your Internet service. Depending on how your Internet service
is set up, you could be plugging into an available Ethernet jack on
any of the following:
• On a digital cable modem
• On a DSL modem
• On a router in your home
• In an Ethernet wall outlet
Use the examples on the following page to match your setting with the
correct installation method.
Initial Setup
setup network
plug in ethernet cable
or press button below for wi
language
telephone line
network connection
time and date
software
terms and conditions
To Next Page
Loading...
