UNI-T UTG900E Series

Programming Manual UTG900E Series
Instruments.uni-trend.com
11 / 41
The query returns 2e+0
:CHANnel<n>:AMPLitude:UNIT
 Command Format
:CHANnel<n>:AMPLitude:UNIT {VPP | VRMS | DBM}
:CHANnel<n>:AMPLitude:UNIT?
 Function
Set the unit of output amplitude in specified channel.
<n>: Channel No., n value 1, 2.
 Return Format
The query returns the unit of output amplitude in specified channel.
 Example
:CHANnel1:AMPLitude:UNIT VPP
Set the unit of output amplitude in channel 1 to VPP.
:CHANnel1:AMPLitude:UNIT?
The query returns VPP
:CHANnel<n>:LOAD
 Command Format
:CHANnel<n>:LOAD <resistance>
:CHANnel<n>:LOAD?
 Function
Set the output load of specified channel.
<resistance> means the load resistance, in “Ω” unit.
<n>: Channel No., n value 1, 2.
Note: The resistance value should be within the range of 1~10000, and the 10000 is for high resistance.
 Return Format
The query returns the load resistance of specified channel, using scientific notation to return.
 Example
:CHANnel1:LOAD 50
Set the output load of channel 1 to 50Ω
:CHANnel1:LOAD?
The query returns 50e+0
:CHANnel<n>:BASE:WAVe
 Command Format
:CHANnel<n>:BASE:WAVe { SINe | SQUare | PULSe | RAMP | ARB | NOISe | DC }
:CHANnel<n>:BASE:WAVe?
 Function
Set the fundamental wave types of specified channel, including the Sine Wave, Square Wave, Pulse
Wave, Ramp Wave, Arbitrary Wave, Noise, DC.
<n>: Channel No, n value 1, 2.
 Return Format
The query returns the fundamental wave types of specified channel.
 Example
:CHANnel1:BASE:WAVe SINe
Set the channel 1 to sine wave.