UNI-T UTG900E Series Programming Manual

Programming Manual UTG900E Series
Instruments.uni-trend.com
8 / 41
:SYSTem:CYMometer?
 Function
Control the system frequency meter ON/OFF.
Note: Synchronous output of channel will be off when this function on.
 Return Format
The query returns the system frequency meter ON/OFF, 0 in OFF, 1 in ON.
 Example
:SYSTem:CYMometer ON System frequency meter ON
:SYSTem:CYMometer? The query returns 1
:SYSTem:CYMometer:FREQuency
 Command Format
:SYSTem:CYMometer:FREQuency?
 Function
Get the currently measured frequency of frequency meter.
 Return Format
The query returns the currently measured frequency of frequency meter, in “Hz” unit, using scientific
notation to return the data.
 Example
:SYSTem:CYMometer:FREQuency?
The query returns 2e+3.
:SYSTem:CYMometer:PERiod
 Command Format
:SYSTem:CYMometer:PERiod?
 Function
Get the currently measured period of frequency meter.
 Return Format
The query returns the currently measured period of frequency meter, in “S” unit, using scientific
notation to return the data.
 Example
:SYSTem:CYMometer:PERiod? The query returns 2e-3
:SYSTem:CYMometer:DUTY
 Command Format
:SYSTem:CYMometer:DUTY?
 Function
Get the currently measured duty ratio of frequency meter.
 Return Format
The query returns currently measured duty ratio of frequency meter, in “%” unit.
 Example
:SYSTem:CYMometer:DUTY?
The query returns 20, meaning the duty ratio 20%

UNI-T UTG900E Series Specifications

General

Brand	UNI-T
Model	UTG900E Series
Category	Portable Generator
Language	English