UNI-T UTG900E Series - WARB Commands; :WARB<n>:MODulate; :WARB<n>:CARRier

Programming Manual UTG900E Series
Instruments.uni-trend.com
21 / 41
 Example
:CHANnel1:SWEEP:TIMe 2
Set the sweep time of channel 1 to 2S
:CHANnel1:SWEEP:TIMe?
The query returns 2e+0
WARB Commands
It is used to write file commands of arbitrary wave, including the fundamental arbitrary wave and modulated
arbitrary wave writing configuration.
:WARB<n>:MODulate
 Command Format
:WARB<n>:MODulate <arb file>
 Function
Write the modulated arbitrary wave and the wave data in 4K points. Send the command firstly, and
send the arbitrary wave file data to the signal source.
<arb file> means the arbitrary wave file.
 Example
:WARB1:MODulate
Write the modulated arbitrary wave of channel 1
:WARB<n>:CARRier
 Command Format
:WARB<n>:CARRier <arb file>
 Function
Write the fundamental arbitrary wave and the wave data in 4K points. Send the command firstly, and
send the arbitrary wave file data to the signal source.
<arb file> means the arbitrary wave file.
 Example
:WARB1:CARRier
Write the fundamental arbitrary wave file of channel 1