UNI-T UTG900E Series

Programming Manual UTG900E Series
Instruments.uni-trend.com
18 / 41
:CHANnel<n>:MODulate:DEPTh
 Command Format
:CHANnel<n>:MODulate:DEPTh { <depth>}
:CHANnel<n>:MODulate:DEPTh?
 Function
Set the modulation depth of specified channel.
<depth> means the modulation depth, in “%” unit, range of 0% ~ 100%, and AM modulation depth is 0%
~ 120%.
<n>: Channel No., n value 1, 2, 3, 4.
 Return Format
The query returns the modulation depth of specified channel.
 Example
:CHANnel1:MODulate:DEPTh 50
Set the modulation depth of channel 1 to 50%
:CHANnel1:MODulate:DEPTh?
The query returns 50
:CHANnel<n>:ARB:INDex
 Command Format
:CHANnel<n>:ARB:INDex {<index >}
:CHANnel<n>:ARB:INDex?
 Function
Set the specified channel to load arbitrary wave index stored in signal source.
<index > means arbitrary wave index.
<n>: Channel No., n value 1, 2.
 Return Format
The query returns the arbitrary wave index of specified channel.
 Example
:CHANnel1:ARB:IND 2
Set the channel 1 to load the arbitrary wave index 2 stored in signal source
:CHANnel1:ARB:IND?
The query returns 2
:CHANnel<n>:ARB:SOURce
 Command Format
:CHANnel<n>:ARB:SOURce { INTernal|EXTernal }
:CHANnel<n>:ARB:SOURce?
 Function
Set the arbitrary wave source of specified channel, Internal and External.
<n>: Channel No., n value 1, 2.
 Return Format
The query returns the arbitrary wave source of specified channel.
 Example
:CHANnel1:ARB:SOURce INTernal
Set the arbitrary wave source of channel 1 to be internal
:CHANnel1:ARB:SOURce?
The query returns INTernal