UNI-T UTG900E Series - :CHANnel<n>:PULSe:RISe; :CHANnel<n>:PULSe:FALL; :CHANnel<n>:MODe

Programming Manual UTG900E Series
Instruments.uni-trend.com
15 / 41
Set the signal output symmetry of ramp wave in specified channel.
< symmetry > means symmetry, in “%” unit, range of 0~100.
<n>: Channel No., n value 1, 2.
 Return Format
The query returns the signal output symmetry of ramp wave in specified channel.
 Example
:CHANnel1:RAMP:SYMMetry 20
Set the ramp wave signal symmetry of channel 1 to 20%
:CHANnel1:RAMP:SYMMetry?
The query returns 20
:CHANnel<n>:PULSe:RISe
 Command Format
:CHANnel<n>:PULSe:RISe {<width>}
:CHANnel<n>:PULSe:RISe?
 Function
Set the rising edge pulse width of signal pulse wave in specified channel.
<width> means the pulse width, in “S” unit.
<n>: Channel No., n value 1, 2.
 Return Format
The query returns the rising edge pulse width of signal pulse wave in specified channel, using scientific
notation to return.
 Example
:CHANnel1:PULSe:RISe 0.002
Set the rising edge pulse width of channel 1 signal to 2ms
:CHANnel1:PULSe:RISe?
The query returns 2e-3
:CHANnel<n>:PULSe:FALL
 Command Format
:CHANnel<n>:PULSe:FALL {<width>}
:CHANnel<n>:PULSe:FALL?
 Function
Set the falling edge pulse width of signal pulse wave in specified channel.
<width> means the pulse width, in “S” unit.
<n>: Channel No., n value 1, 2.
 Return Format
The query returns the falling edge pulse width of signal pulse wave in specified channel, using
scientific notation to return.
 Example
:CHANnel1:PULSe:FALL 0.002
Set the falling edge pulse width of channel 1 signal to 2ms
:CHANnel1:PULSe:FALL?
The query returns 2e-3
:CHANnel<n>:MODe
 Command Format