UNI-T UTG900E Series

Programming Manual UTG900E Series
Instruments.uni-trend.com
7 / 41
:SYSTem:BEEP ON Turn buzzer on
:SYSTem:BEEP? The query returns 1
:SYSTem:NUMBer:FORMat
 Command Format
:SYSTem:NUMBer:FORMat {COMMa|SPACe|NONe}
:SYSTem:NUMBer:FORMat?
 Function
Control the separator of system number format.
 Return Format
The query returns the separator of system number format.
 Example
:SYSTem:NUMBer:FORMat NONe
Set the system number format to be none
:SYSTem:NUMBer:FORMat?
The query returns NONe
:SYSTem:BRIGhtness
 Command Format
:SYSTem:BRIGhtness { 10|30|50|70|90|100}
:SYSTem:BRIGhtness?
 Function
Control the brightness of system backlight.
 Return Format
The query returns the brightness of system backlight.
 Example
:SYSTem:BRIGhtness 30
Set the brightness of system backlight to 30%
:SYSTem:BRIGhtness?
The query returns 30
:SYSTem:SLEEP:TIMe
 Command Format
:SYSTem:SLEEP:TIMe { CLOSe | 1 |5 | 15 |30 |60}
:SYSTem:SLEEP:TIMe?
 Function:
Control the sleep time of system, in “Minute” unit.
 Return Format
The query returns the sleep time.
 Example
:SYSTem:SLEEP:TIMe 5 MIN
Set the system to auto-sleep in 1 minute
:SYSTem:SLEEP:TIMe?
The query returns 1
:SYSTem:CYMometer
 Command Format
:SYSTem:CYMometer {{1 | ON} | {0 | OFF}}