10
PAGER
INTRODUCTION
<4-2>SOS Button (A programmable key of GSM model)
can be programmed as a SOS button. When “SOS Button is
enabled, press this key for 3 seconds, the emergency message will
be activated then sent to the designated destination via GSM or
GPRS.
※The Emergency Message can only be activated when the
pager has an active LCD screen i.e. standby or menu screen .
To operate Emergency from ECM condition , the screen must
first be made active with a short press of any key.
<5>OK KEY
1.
2.
3.
For the feature settings, OK KEY is a confirmation key to confirm all the
settings.
When the pager is stand-by, OK KEY is to display the latest message
that received on the day when the pager is operated.
When reading message, OK KEY is to scroll through the pages.
To Next Page
Loading...
