Configuration Hints for PBXs
c05.fm
OpenScape Business (OSBiz)
A31003-C1020-S100-03-7620, 12/2017
62 OpenScape Cordless IP V2, Service Documentation
5 Configuration Hints for PBXs
In the following chapters you can find configuration notes for for different PBXs
which have to be released for usage with the OpenScape Cordless IP V2 system.
5.1 OpenScape Business (OSBiz)
Here you can find the configuration hints using an OpenScape Business using
SIP users.
5.1.1 Base Configuration - OSBiz
The following value is used for the base configuration:
Detailed configuration instruction for the OSBiz would go beyond the scope of this
documentation. Therefore only the information regarding the configuration which
is very important and relevant for the interworking is described here.
Detailed documentation for the OSBiz may be found in the OpenScape Business
Administrator Documentation.
1. Please configure the OSBiz for the usage with SIP Users and configure the
needed number of SIP Users in the Installation Assistant.
2. Configure the IP address of the OSBiz to 192.168.0.93 or change the
according IP addresses.
3. Configure the following Codec Parameters via "WBM - Expert mode - Voice
Gateway - Codec Parameters":
Codec priority (G711a, G711u, G729a, G729b) and RTP framing (20 msec)
is recommended.
Parameter Value
IP address of the OSBiz 192.168.0.93
To Next Page
Loading...
Need help?
General