Unify OpenScape Cordless IP V2 Service Documentation

Technical Data
c06.fm
Base Stations
A31003-C1020-S100-03-7620, 12/2017
78 OpenScape Cordless IP V2, Service Documentation
6.2 Base Stations
General
DECT IP Basisstation BSIP2
• Software Can be loaded via the communication system.
• Antennas Two external antennas are mounted on the top of
the housing of the base station.
The base station works as option with antenna
diversity (this means that the radio receiver is
connected to whichever antenna delivers the
greater field strength).
• Average output power 10 mW to 125 mW
• Radio range Basically dependant on the radio transmission
characteristics of the environment/premises.
– Outdoors Up to 300 m
– Indoors Up to 50 m
• Power supply PoE is used to supply power to the DECT IP base
station
• Accessories Outdoor housing
• Dimensions 202 x 172 x 43 (W x H x D in mm)
• Weight 500 g
• Power supply PoE, according IEEE 802.3af Class 2
• Power consumption < 6,5 W
• Operating temperature indoors
Outdoors (in outdoor housing)
+ 0°C to + 40°C
- 25°C to + 40°C
• Cabling 10/100 Mbps Ethernet cable, Cat. 5 and higher,
8-pin shielded RJ45 connector

Unify OpenScape Cordless IP V2 Specifications

General

Brand	Unify
Model	OpenScape Cordless IP V2
Category	Accessories
Language	English