Unify OpenScape Cordless IP V2 - Page 91

c07.fm
Diagnosis and Maintenance
Testing the Radio Area
A31003-C1020-S100-03-7620, 12/2017
OpenScape Cordless IP V2, Service Documentation 91
The measurement values are not displayed if the mobile telephone is switched
on.
Activate the "Service" menu:
Enter code 76200.
Deactivate the measuring mode:
Using the navigation key,
scroll down to "Measuring
time".
Confirm with OK.
Measuring mode is switched
off; the tick next to
"Measuring mode"
disappears.
Switch off the mobile telephone:
Press the on-hook key until
the confirmation beep is
heard (ascending tone
sequence).
Nothing is displayed
1
2
4
56
7
89
*
0
#
3
Service
QS data
SW version
Speechpath test
Service 1
OK
OK
Service
Measuring mode
DSP parameters
Measuring time
Service 6
OK