Unify OpenStage 15 User Manual

Enhanced phone functions 101
Ending a local conference
Prerequisite: The "”Allowing joining in a local conference”  Page 102" func-
tion is activated.
Select and confirm the option shown in the menu. Both call partners remain con-
nected. You are disconnected from the conference call.
or
^
or n Replace the handset or, if you are in speakerphone mode, press the loudspeak-
er key. Both call partners remain connected. You are disconnected from the con-
ference call.
Disconnecting a party
Select and confirm the option shown in the menu.
Both connections are cleared down – the conference is cleared down.
Allowing a local conference
This option allows or blocks the "Conference" function.
z
You can also configure this setting via the web interface  Page 197.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Exit Conf? l
End Conf? f
Settings
User
Configuration
Connected calls?
Allow conferences = No m
Yes l
Save & Exit l

Unify OpenStage 15 Specifications

General

Display	Yes
Display Lines	2
Keypad	Yes
Speakerphone	Yes
Volume Control	Yes
Wall Mountable	Yes
Headset Port	Yes
Power over Ethernet (PoE)	Yes
Ethernet Port	1
Protocols	SIP
Dimensions	200 x 200 x 90 mm
Weight	0.8 kg