Unify OpenStage 15 User Manual

54 Call forwarding
Call forwarding
Depending on the settings made by administrator, standard call forwarding may
be configured for the phone or alternatively a call forwarding by call type that is
supported by OpenScape Voice
 Page 61.
Standard call forwarding
You can forward calls for your phone to any another phone. You can also
change, activate, and deactivate call forwarding during a call. The Forwarding
function must have been activated by administrator.
Three forwarding conditions can be programmed in the Forwarding menu:
• Unconditional
•Busy
• No reply ({1}s)
Because of its direct impact, "Uncond’l" call forwarding has the highest priority
followed by "No reply" and "Busy".
If active, "Uncond’l" call forwarding is indicated on the display when the phone
is idle.
Forwarded calls are logged in a call list if allowed (see  Page 27).
The Forwarding menu offers you three types of call forwarding.
 Uncond’l Destination phone number
 Busy Destination phone number
 No reply ({1}s) Destination phone number
A phone number may already be assigned to each call forwarding type. For ex-
ample, a Destination could then be Destination 12345 for example.
On multi-line telephones ( Page 13), you can only configure call forward-
ing for the primary line.
Alternatively, call forwarding can be programmed on one or more keys with
a fixed destination and a predefined forwarding or call type
 Page 73.

Unify OpenStage 15 Specifications

General

Brand	Unify
Model	OpenStage 15
Category	Telephone
Language	English