Unify OpenStage 15 User Manual

178 Individual phone configuration
Settings for the "Pattern" ringtone type
If you selected "pattern" as the ringtone type, you can make further settings for
the pattern melody and pattern sequence:
Select and confirm the option shown.
Select the required pattern melody between 1 and 8 (e.g. 4). You will hear the
associated Ringer melody. Confirm the selected Ringer melody.
Select and confirm the option shown.
Select the required Ringer tone sequence between 1 and 6 (e. g. 2).You imme-
diately hear the set Ringer melody with the selected Ringer tone sequence. Con-
firm the selected setting.
Select and confirm the option shown.
Tone and indication with an unsecured voice
connection
Use this option to activate an alerting tone that you hear when a secure voice
connection with the party you are currently talking to ceases to be secure. The
message "Nonsecure connection" also appears.
Prerequisite: Secure connection setup is the preference set by your adminis-
trator.
z
You can also configure this setting via the web interface  Page 197.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select and confirm the option shown.
Pattern melody
4
Pattern sequence
2
Save & Exit
Settings
User
Configuration
Connected calls
Secure call alert = No
Yes
Save & Exit

Unify OpenStage 15 Specifications

General

Brand	Unify
Model	OpenStage 15
Category	Telephone
Language	English