Unify OpenStage 15 User Manual

70 Programmable keys
Programming a key
z
You can also configure this setting via the web interface  Page 197.
Starting programming
Directly via the key
S Hold down the programmable key you want to assign a function to until the pro-
gramming prompt is displayed.
Confirm to begin programming. The key illuminates continuously.
or Via the user menu
You can also program keys via the user menu.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown. You are prompted to press the key you
wish to program.
S Press the key you want to program until the input field opens. The key illumi-
nates continuously.
If the prompt is not displayed or a programmed function is not executed,
then you can only launch key programming via the user menu (ask your
administrator about the current setting).
OK
Settings
User
Phone
Program keys

Unify OpenStage 15 Specifications

General

Display	Yes
Display Lines	2
Keypad	Yes
Speakerphone	Yes
Volume Control	Yes
Wall Mountable	Yes
Headset Port	Yes
Power over Ethernet (PoE)	Yes
Ethernet Port	1
Protocols	SIP
Dimensions	200 x 200 x 90 mm
Weight	0.8 kg