Unify OpenStage 15 - Beginning Programming; Programming Enhanced Functions; Repertory Dial

Programmable keys 71
Beginning programming
Select and confirm the option shown to program the first level.
or
Select and confirm the option shown to program the second level.
Select and confirm the required function in the list (e. g. Do not disturb).
Select and confirm the option shown.
Programming enhanced functions
Repertory dial
S Hold down the key you want to assign a function to until the programming
prompt is displayed.
Confirm to begin programming. The key illuminates continuously.
z
You can also configure this setting via the web interface  Page 197.
Select and confirm the option shown to program the first level for instance.
Select and confirm the required function.
Select and confirm this option to enter a destination phone number.
j Enter and confirm a stations’s destination phone number.
You can select and insert special characters in the dialling sequence:
« Clear call
~ Make consultation
» Make normal call
¬ Pause
The menu also offers the following functions:
• Move cursor right and left
•Copy
•Paste
• Mode selection
• Cancel
•OK
Select and confirm the option shown.
Normal
Shifted
Do not disturb
Save & Exit
If the prompt is not displayed or a programmed function is not executed,
then you can only launch key programming via the user menu (ask your
administrator about the current setting).
OK
Normal = f
Repertory dial f
Setting f
Save & Exit l
The repertory dial can be up to 40 characters long.