Unify OpenStage 15 User Manual

Basic functions 49
Putting on hold and retrieving successively or
simultaneously
Putting an active call on hold
Prerequisite: You have a single-line phone and are conducting a consultation
call
 Page 47 or have accepted a second call  Page 86. The "Hold" key must
be configured  Page 69
The "Hold" function can also be initiated from the context menu.
S Press the "Hold" key. The key flashes. The consultation or second call and the
first call are put on hold.
Retrieving the first call
< Switch to the first call.
R Press the flashing "Hold" key. You are connected with the other party. The con-
sultation or second call continues on hold.
Retrieving the second call
: Switch to the held consultation or second call
R Press the flashing "Hold" key. You are connected with the other party. The first
called is put on "Hold" again.

Unify OpenStage 15 Specifications

General

Display	Yes
Display Lines	2
Keypad	Yes
Speakerphone	Yes
Volume Control	Yes
Wall Mountable	Yes
Headset Port	Yes
Power over Ethernet (PoE)	Yes
Ethernet Port	1
Protocols	SIP
Dimensions	200 x 200 x 90 mm
Weight	0.8 kg